Battery Compression Testing Machine

The battery compression testing machine is designed to simulate the compression of various battery types during use, transportation, storage, or disposal of household waste. The battery is considered qualified if it does not explode or ignite. The machine complies with standards including GB31241-2014.

The battery compression testing machine is suitable for simulating the compression of various types of batteries during use, transportation, storage, and disposal of household waste. The battery is considered qualified if it does not explode or ignite. The battery compression testing machine complies with standards including GB 31241-2014.

GB 31241-2014  《Safety requirements for lithium-ion batteries and battery packs for portable electronic products》

YD/T 2344.1-2011  《Lithium iron phosphate battery packs for communication — Part 1: Integrated batteries》

GB/T 21966-2008  《Safety requirements for lithium primary and secondary batteries during transportation》

YD 1268-2003  《Safety requirements and test methods for lithium batteries and chargers in mobile communication handheld devices》

GB/T 19521.11-2005  《Safety specification for inspection of dangerous characteristics of lithium battery packs as dangerous goods》

IEC 62281:2004  《Safety requirements for lithium primary and secondary batteries during transportation》

Drive mode: hydraulic drive

Battery extrusion head (plate): standard circular extrusion plate; easy to disassemble and replace (extrusion plate diameter: 150 mm)

Squeezing degree: compression continues until the actual pressure reaches 13 kN ± 0.2 kN, then held for 1 minute. After the maximum pressure is reached, the equipment automatically releases pressure and completes the compression process.

Maximum pressure range: 1 kN to 20 kN (typical: 13 kN)

Pressure display accuracy: 0.1 N; sensor resolution: 1/10,000

Unit conversion: kg, N, lb

Data sampling frequency: 80 times/second

Compressed space: 520 × 500 × 445 mm (width × height × depth)

Compression stroke: 200 mm

Delay function: 0–9999 (H/M/S can be freely set and adjusted for the test duration)

Machine dimensions: 730 × 775 × 1910 mm (width × depth × height)

Power supply: AC 380 V, 50 Hz, 15 A