JingYao’s blowing sand and dust test chamber simulates desert dusty environments for laboratory dust testing. It is equipped with a vacuum system and a dust heating anti-caking system, and it meets GB4208, IEC 60529, and MIL-STD-810 standards. In stock.
The JingYao blowing sand and dust test chamber simulates a desert dusty environment. It is equipped with a vacuum system and a dust-heating anti-caking system to support reliable dust-testing conditions. It complies with GB4208, IEC60529, and MIL-STD-810 standards, and is available in stock for laboratory dust testing.
JingYao Instrument Upgraded Sand & Dust Test Chamber for High-precision IP Dust-Rating Testing
Recently, JingYao Instrument launched its newly upgraded intelligent sand and dust test chamber. The new model optimizes the closed-loop circulating air duct structure and adopts an independent dust-heating and dehumidification module to help prevent dust caking caused by moisture. Sand/dust distribution uniformity inside the chamber is increased by 28% (reference value provided by the manufacturer), and repeat test error is controlled within ±2% (reference value provided by the manufacturer).
Equipped with a 7-inch industrial touch PLC control system, the unit allows flexible setting of dust-blowing time, vibration cycles, and negative-pressure vacuum parameters. It enables one-click switching between IP5X dust-protected testing and IP6X dust-tight testing. The inner chamber is integrally bent from 304 stainless steel for corrosion resistance and to help prevent dust accumulation. A detachable dust-collection bin at the bottom supports easy cleaning.
Compliant with GB/T2423.37, GB4208, IEC60529, and MIL‑STD‑810 standards, this dust test chamber is widely used for dust reliability testing of automotive lamps, door locks, vehicle electronics, outdoor lighting, security equipment, military components, and charging-pile enclosures—helping enterprises complete IP certification and reliability verification.
According to JingYao’s management, this upgrade addresses three common pain points of traditional dust test chambers: dust agglomeration, uneven dust circulation, and difficult cleaning. Optional customization is available, including dedicated chamber size, Wi‑Fi data transmission, and remote monitoring for laboratories, automotive R&D centers, and third-party testing institutions. All models are available for spot delivery now.
