PS-300 Hydrogen Generator Gas Chromatography Test Kit
PS-300 High Purity Hydrogen Generator is designed to supply stable hydrogen for various gas chromatograph models from domestic and overseas manufacturers. It uses high-sensitive fuzzy pressure control with an automatic tracking system to keep pressure stability within less than 0.001 MPa, and the electrolytic cell applies transient metal element catalytic technology with multi-stage purification, including two built-in filters. Hydrogen purity can reach oxygen content of less than 3 PPM and a wa
- Categories:Oil Test Equipment
PS-300 High Purity Hydrogen Generator is designed to supply stable hydrogen for various gas chromatograph models from domestic and overseas manufacturers. It uses high-sensitive fuzzy pressure control with an automatic tracking system to keep pressure stability within less than 0.001 MPa, and the electrolytic cell applies transient metal element catalytic technology with multi-stage purification, including two built-in filters. Hydrogen purity can reach oxygen content of less than 3 PPM and a wa
- 1. Program control: The dedicated chip is used in the instrument control system. The instrument’s entire operating process is managed by program control. Automatic adjustment of constant voltage, constant current, and hydrogen flow is available in the range of 0–300 ml/min according to application requirements.
2. Low humidity in hydrogen production: The system uses a film-separation technique and an effective dehumidification device to further reduce the original moisture content. A multi-polar absorption approach is applied to achieve a hydrogen dew point temperature of -56 °C.
3. Easy operation: Switch on the power supply only when hydrogen is required. Operation can be continuous or intermittent, and hydrogen production remains stable without attenuation.
4. Safe and reliable: A safety device is integrated into the system, providing sensitive and reliable protection.
1 – Purified tube | 6 – Electrolyte solution liquid reservoir |
2 – Upper-limit indication of electrolyte solution | 7 – Hydrogen outlet port |
3 – Working pressure indicator | 8 – Power supply cable |
4 – Hydrogen digital flow indicator | 9 – Electrolyte solution indicator lamp |
5 – Lower-limit indication of electrolyte solution | 10 – Power supply switch |
Main Technical Parameters
Hydrogen purity | 99.999% (Oxygen content < 3 ppm; water content – dew point -56 °C) |
Hydrogen flow | 0–300 ml/min |
Output pressure | 0–4 kg/cm² (reference: about 0.4 MPa) |
Pressure stability | < 0.001 MPa |
Power supply | 220 V ± 10%, 50 Hz |
Power consumption | 150 W |
Ambient temperature | 1–40 °C |
Relative humidity | < 85% |
Outer dimensions | 360 × 200 × 260 mm |
Net weight | About 10 kg |
